 |
 |
End mills with a cylindrical shank R6M5K5 have the following important properties:
- It is possible to manufacture cutters of non-standard sizes under the order
- Material - high speed steel R6M5K5
- For shaping flat surfaces in parts of various configurations
- Modifications of end mills with -3, -4, -5 teeth according to DIN 844 and keyway cutters with -2 teeth according to DIN 327
| D, mm | Price, UAH | ||||
| d1, mm | Lp, mm | Lo mm | Number of teeth | ||
| 2.0 | 4 | 7 | 40 | 2, 3, 4, 5 | eighteen |
| 3.0 | 4 | 8 | 40 | 2, 3, 4, 5 | 18.90 |
| 4.0 | 4 | eleven | 47 | 2, 3, 4, 5 | 19.50 |
| 5.0 | five | 13 | 53 | 2, 3, 4, 5 | 21 |
| 6.0 | 6 | 13 | 57 | 2, 3, 4, 5 | 21.90 |
| 8.0 | 8 | 19 | 63 | 2, 3, 4, 5 | 28.50 |
| 10.0 | 10 | 22 | 72 | 2, 3, 4, 5 | 33.90 |
| 12.0 | 12 | 26 | 83 | 2, 3, 4, 5 | 54 |
| 14.0 | 2 | 26 | 83 | 2, 3, 4, 5 | 66 |
| 16.0 | 16 | 32 | 92 | 2, 3, 4, 5 | 72 |
| 18.0 | 16 | 32 | 92 | 2, 3, 4, 5 | 90 |
| 20.0 | twenty | 32 | 104 | 2, 3, 4, 5 | 93 |
| 22.0 | twenty | 38 | 104 | 2, 3, 4, 5 | 123 |
| 25.0 | 25 | 45 | 121 | 2, 3, 4, 5 | 159 |
| 28.0 | 25 | 45 | 121 | 2, 3, 4, 5 | 180 |
| 30.0 | 25 | 45 | 121 | 2, 3, 4, 5 | 219 |
*Prices do not include VAT 20%
Download PDF document (10 Mb)